|
|
See our all new Tanning Lamps & Bulbs store. Order online now.
The Aurora Tanning System Morning Sun 2.6
– Unlock your equipment’s true bronzing power with the light touch of
Morning Sun lamps! Morning Sun is our answer to the markets call for superior
melanin production and oxidation with minimal redding. Or the client who is new
to indoor tannin, or one who desires a true dark tan with less initial redness,
we offer Morning Sun lamps. These lamps give a gentle, satisfying tan that is
agreeable to new tanners and light-skinned clients as well! Signature Series Longer Life – The newest state-of-the-art phosphor blend development provides superior stabilized tanning performance for longer effective tanning response. Improved Cathode Design – Designed for the rigors of frequent starting and higher operating currents in preheat and rapid start applications, the Signature Series incorporates unique heat shields and cathode guards for optimal performance and minimal end darkening. Tans Better – Signature Series lamps emit more total UV, and maintain their higher output for longer! Faster Warmup – The phosphor blends in the Signature Series lamps rise to full UV output much faster than those of competitive manufacturers. This means that your customers will be tanning at full efficiency for longer than is possible with any competitive lamp types. More minutes at full exposure strength equals a better tan! Lower Cost Per Session – Signature Series VHOR maintain their higher output longer than any competitive lamp! Compare the value, dollar-for-dollar and make the Light Sources Signature Series lamp your next choice for a reflector lamp!
Indoor Tanning Lamp Operator Instructions & Warnings WEAR PROTECTIVE EYEWEAR; FAILURE TO MAY RESULT IN SEVERE BURNS OR LONG-TERM INJURY TO THE EYES. DANGER - Ultraviolet radiation. Follow instructions. Avoid overexposure. As with natural sunlight, overexposure can cause eye and skin injury and allergic reactions. Repeated exposure may cause premature aging of the skin and skin cancer. Medications or cosmetics may increase your sensitivity to the ultraviolet radiation. Consult physician before using sunlamp if you are using medications or have a history of skin problems or believe yourself especially sensitive to sunlight. If you do not tan in the sun, you are unlikely to tan from use of this product. To help you better understand the product which you have purchased, we offer the following technical information. Electrode Assemblies: Signature Series lamps use custom electrode assemblies, which have been designed and manufactured specifically for the tanning industry. These electrodes are made for operation at up to 2000 mA. In addition, they are designed and tested to withstand the constant on and off cycling typical of the indoor tanning industry. They are also tested for use in both the preheat and rapid start modes. With Signature Series lamps, the typical end blackening seen during lamp aging is greatly reduced through the use of a special anode/filament combination. The Signature Series lamps employ large cooling chambers behind the lamp electrodes. Some salon operators have perceived the resulting dark areas near the lamp bases to be outward signs of some lamp defect; this is not the case! The larger cooling chambers behind the lamp electrodes are actually there to enhance lamp operation and tanning. Without them, it is very difficult to properly cool the heavily loaded lamps to optimize the lamp operation. Lamp operation: During normal operation, VHO lamps produce a tremendous amount of heat. If not properly cooled it is nearly impossible for any VHO lamp to reach its maximum intensity. By producing a lamp with a large cooling zone behind the filaments the Signature Series lamps can reach their optimum temperature and U.V. intensity with minimal air flow. It is recommended that the cooling air in the system be directed to the body of the lamps and not directly onto the cooling chambers. Occasionally lamps of this type will exhibit what is seen as a slow warm up. This is typical when the bulbs have been off for an extended period of time, especially if left in a cool environment. This can also be caused by excess cooling on the lamp ends. These circumstances cause the mercury vapor to migrate to the lamp ends and condense. This is generally corrected by operating the lamps for a period of about 60 minutes to allow the mercury to be re-distributed in the lamps. Tanning customers may also see what they perceive as visual color variations, especially in new lamps. This is caused during the lamps normal ‘break in’ period while the lamps are stabilizing the mercury vapor. This variation will generally go away after one or two hours of lamp operation. Customers should not relate visible brightness to U.V. intensity. We recommend all tanning salons to have a U.V. meter to be able to monitor lamps for maintenance and proper operation. Operating Tips: Proper seating of lamps in their sockets is vital! Poor seating can lead to poor electrical contact between lamp and socket–and can significantly shorten the life of any lamp. If the Signature Series lamps are used in a preheat circuit, it is important to replace the existing S-12 starter with every or every other lamp change. An old, worn out $2 starter can dramatically shorten the life of a lamp worth many dollars more! Minor instabilities such as “snaking” or “swirling” can be corrected by turning the lamps on and off several times after installation. Clean lamps can improve UV output by as much as
10%! Therefore, make sure you wipe your lamps down with a damp cloth on a
regular basis (don’t use solvents!). An acrylic that is old and solarized can
filter out over 10% of the UVA that is trying to get through, and over 50% of
the UVB that is so vital for a tan! Using your UV meter, check lamp output with,
and then without, the acrylic sheet in place. If the difference in output
exceeds 10%, it’s time to replace the acrylics. It is always a good idea to
have a database on each piece of tanning equipment you own. When you install the
lamps, and after you have burned them in, read their initial UV output using
your UV meter. While opinions vary widely about when to replace lamps, a
generally accepted range throughout the industry is when the lamp readings drop
to about 60-70% if the initial output. Keep separate records for each piece of
tanning equipment, as each lamp type is unique in its output characteristics. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Home | Contact Us | Site Map Copyright © 2005 Phoenix Sun Tanning, LLC All rights reserved. Last Modified 11/25/2008 Designed and maintained by: www.SandraDeesWebDesign.com |
